SIAT RA-A Semi-Automatic Stretch Wrapper
SIAT RA-A Semi-Automatic Stretch Wrapper Others Johor Bahru (JB), Malaysia, Selangor, Kuala Lumpur (KL), Ulu Tiram, Puchong Supplier, Suppliers, Supply, Supplies | DLIS INDUSTRIAL SUPPLIES SDN BHD


RA-A Semi--Automatic Wrapping Machines
 
The RA-A model is a semi-automatic machine for the wrapping of palletized loads with stretch film (auto attach & film cut): with the possibility of adjusting of film tension by motorized prestretch, gradual starting of turntable, manual or automatic cycle and possibility of adjusting the film pallet over-lap.
The working cycle is started by pressing the START button. The arm starts to rotate and the first bottom film layers are applied. After some arm rotations, the film carriage rises. A photocell reads the maximum height of the load and stops the film carriage upward movement. After some wrapping rotations, the film carriage descends and the arm stops just the carriage reaches the lower part of load. The rotating arm stops in “ Fix Position Stop” at the end of the cycle.




Main Features

  • Max. pallet height: 2100 mm
  •  
Arm
  • Arm speed adjustable by inverter (6 -12 RPM) / Soft Start & Fix Stop
  • Cut & attach system of the film tail at the end of the working cycle
Carriage
  • Belt driven carriage
  • Film carriage with mechanical/electromagnetic clutch M or FM
  • Film carriage with motorized prestretch LP
  • Adjustable carriage speed by inverter

Model

RA-A
  1. 4 wrapping programs (up & down / up only / both with pause for top sheet)
  2. Manual & automatic working modes
  3. Photocell to detect pallet height
  4. Pallet OVER-LAP and carriage stop delay set-up
  5. Automatic "Fix Stop Position" (also manual mode)
  6. Adjustable arm speed by inverter
  7. Adjustable carriage speed by inverter
  8. Top & bottom revolutions set-up
  9. Additional wraps: carriage ascent time and revolutions set-up + top press control
  10. Possibility to memorize up to 9 wrapping programs that can be recalled by pressing the wrapping program number
  11. Key-Lock to enable operator to alter parameters
RA-S

  1. 2 wrapping programs (up & down / up only)
  2. Manual & automatic working modes
  3. Photocell to detect pallet height
  4. Adjustable arm speed by inverter
  5. Adjustable carriage speed by inverter
  6. Top & bottom revolutions with timer

Options

  1. Remote control
  2. Safety fences

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version